Improve your experience. We are very sorry but this website does not support Internet Explorer. We recommend using a different browser that is supported such as Google Chrome or Mozilla Firefox.

Stabilisation Fundamentals (Online)

This course by live webinar presented in two half day packages of two sessions each will briefly review the types of stabilisation before more detailed presentations on types of binders, material characteristics, design and mix detailing, with sessions on specifying and case studies for practical outcomes. A feature of this Course is its significant practical and project-based content which aims to provide advice on road stabilisation solutions.

Description

Delivered via Zoom

This course by live webinar presented in two half day packages of two sessions each will briefly review the types of stabilisation before more detailed presentations on types of binders, material characteristics, design and mix detailing, with sessions on specifying and case studies for practical outcomes. A feature of this Course is its significant practical and project-based content which aims to provide advice on road stabilisation solutions.

The use of stabilisation technology for stabilising and recycling of materials for pavement construction & rehabilitation is widely accepted as a cost-effective method of improving long term performance and reducing whole-of-life costs of modern, heavily trafficked pavements.

Overall the course will include discussion on the types of various stabilising binders used in road construction, their properties, manufacture, and chemical reactions during the stabilisation process and safety considerations associated with their use.

The Austroads Guides to Pavement Technology – Part 4D, Stabilised Materials, and Part 4L, Stabilising Binders, and the AustStab Pavement Recycling and Stabilisation Guide are used as the key references.

PLEASE NOTE: Hard copies of the AustStab ‘Pavement Recycling and Stabilisation’ and ‘Insitu Stabilisation Construction' Guides are available to course registrants by post, free of charge, by emailing AustStab at enquiry@auststab.com.au and providing a postal address prior to course.

Sessions and Topics

Times shown are based on Melbourne/Sydney times.

Part A - Day 1

Session 1 -  11.00am - 12.45pm
Session 2 -   1:15pm - 3.00pm 

  • Setting the Scene: Introduction to Stabilised Pavements
  • Binder Types (Review)
    • Introduction
    • Traditional
    • Non-traditional
  • Material Mix Design

Part B - Day 2

Session 3 -  11.00am - 12.45pm
Session 4 -   1.15pm - 2.50pm 

  • Austroads Structural Design of Pavements
  • Structural Design for Lightly-trafficked Stabilised Pavements
  • Lime Stabilisation of Subgrades (part 1 & 2)
  • Foamed Bitumen Stabilisation: Theory, Design & Construction
  • Wrap up and Lessons Learnt

 Workshop  (optional)

 Session 5 - 3.00pm - 4.00pm 

  • Design Exercises and A live Q&A session

Primary Presenters

Colin Leek, Principal Engineer Pavements

Colin Leek commenced his career in Local Government and become interested in pavements in the early 1980s.  During his long association with City of Canning, he introduced Insitu Foamed Bitumen Stabilisation into WA, and the use of recycled crushed concrete as a base material. During this time, he studied for a Master degree in Pavement Technology with Deakin University and undertook much research into pavement stabilisation. Due to his demonstrated interest in research, he was approached to join ARRB in 2008 in pavements research, and in 2010 moved to Curtin University where he undertook lecturing and high-level research into various road pavement activities including the use of plastics in asphalt and the fatigue properties of foamed bitumen as well as supervising PhD students.

He now works as a consultant but continues his commitment to the pavement profession by lecturing at UWA and proposing and supervising research projects for final year Engineering projects and PhD level students.

Who should attend?

  • State road agency and local government engineers and managers with responsibilities in the provision, approval, design, construction or maintenance of roads & pavements. This also includes project managers and senior supervisors.
  • Consulting engineers with involvement in road and/or pavement projects.
  • Road & Pavement construction contractors, engineers, project managers and supervisors.
  • Local Government engineers, project managers and senior supervisors.
  • Technical operatives and Engineering graduates and “cadets” looking for specialist knowledge for career development.

Due to its practical nature, numbers are limited for this course so it is advisable that you register quickly to avoid missing out on its unique and targeted content.

Bonus Inclusion

  • Free access to webinar recording for 2 weeks post course.
  • PDF of course material.
  • Optional Workshop.

Payment Terms & Cancellation Policy

Payment by Mastercard/visa or bank transfer is required prior to the event. If a Purchase Order is provided, payment may be soon after the event, if agreed by CPEE.

  • Cancellations made 10 working days or more prior to the events start date:   Full refund.
  • Cancellations within 9-5 working days of the event start date:   50% refund.
  • Cancellations less than 5 working days of the events start date or after the event has started:   No refund.

If you are unable to attend this event a substitute attendee may take your place, without penalty. CPEE reserves the right to cancel or reschedule any course, whereby a full refund or course transfer will be provided.

Similar courses

Rural Road Surfacings - Unsealed Workshop (Online)

This workshop, by live webinar is presented in two half day packages of two sessions each and focuses on unsealed roads in rural environments, for project/asset managers of roads, senior supervisors, engineers and engineering technologists, working for federal, state, or local authorities, consultants and contractors.

More Information
Understanding Pavement Defects & Maintenance Essentials (Online)

This course by live webinar is presented in two half day packages of two sessions each, with an optional workshop. The course is primarily concerned with providing delegates with the knowledge, and practical understanding, to enable full evaluation of maintenance options, and their most beneficial use. The importance, and types of maintenance, pavement distress modes and evaluation techniques are reviewed and preventative and periodic maintenance options will be fully explored and detailed

More Information
Mechanistic Pavement Design - CIRCLY (Online)

This Workshop by live webinar is presented in two half day packages of two sessions each. The Workshop provides delegates with an understanding of the theoretical basis of mechanistic pavement design methods and is a hands-on course with each student having access to the CIRCLY program.

More Information
Mine Haul Road Design Workshop (Online)

This Workshop by live webinar is presented in two half day packages of two sessions each, with an optional workshop session and is ideal for those involved with heavy loaded non-highway roads, with specific emphasis on mining haul roads and their particular dynamics involving heavy equipment with very high pay-loads

More Information
Road Surfacings - Sprayed Seals (Online)

This practical course by live webinar is presented in two half day packages of two sessions each, with an optional workshop session. The courses focus is on sealed roads in rural environments and is ideal for project/asset managers of roads, senior supervisors, engineers and engineering technologists, working for federal, state, or local agencies, consultants and contractors.

More Information
Flexible Pavement Design - BOUND basic principles & practices (Online)

This course by live webinar is presented in two half day packages of two sessions each, with an optional workshop session. It will inform on the basic principles & practices involved in bound flexible pavement design and the program will closely follow the content in the appropriate Chapters of the Austroads Guide to Pavement Technology – Part 2: Pavement Structural Design, which is used as the principal reference and a copy will be provided for each Delegate.

More Information
Flexible Pavement Design : Unbound - basic principles & practices (Online)

This course by live webinar is presented in two half day packages of two sessions each, with an optional workshop session. It will inform on the basic principles & practices involved in unbound flexible pavement design and the program will closely follow the content in the appropriate Chapters of the Austroads Guide to Pavement Technology – Part 2: Pavement Structural Design, which is used as the principal reference and a copy will be provided for each Delegate.

More Information
Concrete Pavement Design Fundamentals (Online)

This Workshop by live webinar is presented in two half day packages of two sessions each, with an optional workshop session and is Intended to inform on the principles & practices involved in concrete pavement design The course program will closely follow the content in the appropriate Chapters of the Austroads Guide to Pavement Technology – Part 2: Pavement Structural Design and Part 4C: Materials for the Concrete Pavements, which are used as the principal references.

More Information
Understanding Test Results & Compliance (Online)

This course by live webinar using case studies and real scenarios provides participants with the knowledge and practical understanding to enable evaluation of NATA endorsed test certificates, and to determine ‘how real they are?’. The course explores the fundamentals of measurement uncertainty, calibration, metrological traceability and sampling uncertainty.

More Information
Fundamentals of Road Construction (Online)

This Workshop by live webinar is presented in two half day packages of two sessions each and provides information on the necessary planning and management of Road Construction, together with an overview of the resources and the necessary elements required in planning and managing investigation works prior to commencement of major site works in road construction.

More Information
Concrete Pavement Design Advanced (Online)

This Workshop by live webinar is presented in two half day packages of two sessions each, with an optional workshop session and assumes prior knowledge of the content given in the Concrete Pavement Design - Fundamentals course.

More Information

Press enter to see more results